NTCS
April 2018
Visual Engineering
Video solutions. Integrated
visualengineering.co.uk
Page 6
Connections
The NTCS has two TNC antenna connectors and two
Fischer connectors (CTRL and GPS) as shown on the
right.
Remove the protective caps from all connectors.
Connect the provided antennas to the TNC
connectors at the required orientation. Information
on antenna orientation is described in the
Mounting
section of this user guide.
If a GPS Module (110-3510) is included in the kit this
should connected to the GPS Fisher connector.
Antennas
Power & Network
GPS Module
The CNTRL connector allows the NTCS to be powered by a mains supply and direct cable
connectivity.
The 15v AC/DC power supply connects to the Passive Power Injector cable (110-8301) which in turn
connects to the Fischer CAT5 Cable (110-3507) as shown below.
A cable network connection can now be made once the RJ45 plug of the injector cable is connected
to the local Ethernet network.
CAT5 Cable
110-3507
Connects to
network
AC/DC Power Supply
110-3613
CNTRL Connector
Passive Power Injector
cable 110-8301
Connects to
CTRL
