Visual Circuits Harmony 4E, Руководство пользователя

Страница: 36 / 50

Troubleshooting Tips
26
❏
"Harmony: Failed to allocate mem"
Be sure to verify that the BufferSizePerChannel is set
correctly in Harmony VccReg. Verify all memory is
detected by server on start up or by right clicking on My
Computer and reviewing General.
❏
"Harmony: HARDWARE ERROR"
Inspect the decoder board for damage.
Make sure your motherboard has 3 volts available in the
PCI slots.
Remove the board and re-install.
No video or audio output
❏
First, ensure that the cables are plugged in properly and that
the video and audio outputs are plugged in correctly to the
display device. Try testing another channel of the server on
the same display. Try using other cables.
❏
Note that the output of the decoder board will not display on
a PC monitor.
❏
Dolby Digital MPEG files cannot play on the analog output.
Stuttering files during Playback
Irregular playback on single and multiple channels can be caused
by a number of conditions:
❏
The bit rate of the MPEG files being played exceed the
system capabilities:
The Visual Circuit MPEG decoder
boards and digital servers all have a maximum sustained bit
rate that can be delivered. Refer to the system board and
specifications for information. Please consult your Visual
Circuits representative prior to encoding or designing your
installation if there are any questions.
❏
Incorrect channel to drive mapping in dual card systems
with multiple content drives. For more information see
Dual-Card Servers on page 21.