Pair up and connect the mobile
phone to the radio
Please refer to and at the start of the
chapter on page 26.
In order to operate a mobile phone via the radio
unit, both devices must be paired once.
Pairing must be performed while the vehicle is
stationary.
Requisites
–
Ignition switched on.
–
Remove the headset connection to the mobile
phone if necessary.
–
The Bluetooth
®
function must be enabled and
visible on the phone and radio.
–
The key blocking feature must be unlocked on
the mobile phone.
Follow the owner's manual of the respective mo-
bile phone.
During the pairing process, the mobile phone's
keypad must be used. The mobile phone must be
prepared for such process.
Initiate mobile phone pairing
–
Press the
PHONE
button.
–
Touch the
Search phone
function surface.
After the process is completed, all names of
Bluetooth
®
devices found are displayed.
–
Select the mobile phone from the list of Blue-
tooth
®
devices found.
Then the device and the mobile phone will be
connected. Additional mobile phone or radio en-
tries may be required to conclude their connec-
tion.
–
Confirm successful pairing in the mobile
phone, if necessary.
Depends on the mobile phone:
–
Insert the PIN code displayed on the radio
screen into the mobile phone and confirm.
OR:
–
Compare the PIN code shown on the radio dis-
play with the PIN code shown on the mobile
phone. If the PIN code matches, it must be
confirmed in both devices.
After successfully completing the pairing proc-
ess, the main menu
PHONE
is shown and the
contact list and list of calls stored in the mobile
phone are automatically loaded. Confirm on the
mobile phone, if necessary.
The duration of the loading process varies de-
pending on the amount of data stored in the mo-
bile phone. After completing the loading process,
the data of the device will be available.
Pairing and connecting mobile phones
Multiple mobile phones can be paired to the de-
vice. However, only one mobile phone can be
connected to one device at any given time.
When turning the radio on, the unit automatically
connects to the last mobile phone connected. If
it is not possible to connect to the last mobile
phone used, the phone control automatically at-
tempts to connect to the next mobile phone in
the list of paired phones.
The maximum range of a Bluetooth
®
connection
is approximately 10 metres. Active Bluetooth
®
connections are interrupted if such range is ex-
ceeded. The connection will be automatically re-
stored as soon as the device is in reach of the
Bluetooth
®
range.
Refer to a Volkswagen Dealership for more
information on mobile phone connections
and pairing.
Switching off phone controls
Please refer to and at the start of the
chapter on page 26.
–
End active calls.
–
Switch off the ignition.
–
Remove the key from the ignition.
–
Switch off the mobile phone.
If the vehicle key remains in the ignition cylinder
after switching off the ignition, phone controls
will not be switched off. Phone controls are only
switched off a few minutes later (factory set-
tings: approximately 15 minutes).
If mobile phones were connected with
phone controls, the mobile phone transmis-
sion unit remains active after switching off
phone controls. Switching of the mobile phone
may be required.
Composition Touch (R 340G)
28
