Vista VP960H, Инструкция по установке

Страница: 40 / 49

34
3.14 DOME COMMUNICATION
1. Select the desired Function by pushing Joystick Up or Down.
2. Select the number by twisting the Joystick in DOME ID, PROTOCOL, BAUDRATE, PARITY and
VISTA-FSK.
COMMUNICATION MODE : H/W (Hardware) , S/W(Software)
DOME ID : 000 - 999
PROTOCOL : Auto(default) / F2,F2E / Sensormatic / Pelco-P/D / Vicon / Ernitec /VISTA/
F2/ Philips / Dynacolor
BAUDRATE : 2400/4800/ 9600(default)/ 19200/38400 bps
PARITY : None, Even
VISTA-FSK : On, Off
3.15 MOTION SETUP
The motion detection function is available in the preset mode only. After you set motion in any preset
position, when you call that preset, motion detection will operate.
In the preset setup, you can set the motion setup as follows:
Int the Preset setup menu, select the Cameras Set option
DOME COMMUNICATION SETUP
COMMUNICATION MODE : H/W
DOME ID : 0001
PROTOCOL : AUTO
BAUDRATE : 9600
PARITY : NONE
VISTA-FSK : ON
SAVE AND EXIT(ESC TO CANCEL)
PRESET SETUP
NUMBER : 001
TITLE : ---
CAMERA SET
DWELL : --- SEC
12345678901234567890
00 █**-----------------
02 --------------------
04 --------------------
06 --------------------
NEXT PAGE
SAVE AND EXIT(ESC TO CANCEL)
PRESET CAMERA SETUP
FOCUS : AUTO
MOTION :OFF
MOTION SETUP
AE SETUP
SAVE AND EXIT(ESC TO EXIT)