Vista VK-ENCODER4, Инструкция по установке и эксплуатации

Страница: 44 / 52

35
RTP Setting (These settings are in place for future use and should not be changed)
Settings for sending and receiving video and audio on a real-time basis.
Stream RTP after camera start-up
Enter a destination IP and Port to send movie data automatically through the RTP while the Network
Video Server has booting.
~ Send to DHCP server IP: Send movie data to the DHCP server.
~ Send to (Client) IP: Send movie data to other certain destination addresses.
Use RTP destination Port: Available from 1024 to 65532, and the basic value is 5000.
~
Do not send: Do not send a stream to the FTP until it is requested from a client.
□ Enable multi stream: Check it to send data for the purpose of saving them into an external
extension storage right after the Network Video Server operates.
-Send to secondary client ip:
Enter an IP address of the external extension storage.
-Use RTP destination port:
Enter a Port number of the external extension storage.
The Port number to be used is [1024 ~ 65532].