Vista VK-ENCODER4, Инструкция по установке и эксплуатации

Страница: 18 / 52

9
3. Operation by Web Browser
3.1 Connecting to the Encoder by Web Browser
In order for video to be viewed across the Browser in is necessary for the correct Active-X
components to be installed – These can be downloaded from the Internet if PC is connected
to the Web or alternatively are available on the CD supplied with the product.
● Open the Web Browser on the PC.
● Enter the Network Camera address on the address window of the Web Brower and press enter.
E.G. http://192.168.0.2/
(If the Encoder has no IP address or its IP address is wrong, users will fail to connect the
Encoder. In this case, users will have to connect the Network
Video Server by the Web Browser
after entering the IP address with the IP Setting Utility.)
● Refer to ‘2.2.1 ENCODER IP Assignment’ section for detailed information.
●
If a security window for the ActiveX Controller installation appears, press the Confirm and install it.
●
If it is not connected in the Internet, from the CD ‐ ROM instal
l the ActiveX Controller by manual
operation.
3.2 Real-Time Monitoring
Supports 4 individual channels and Quad screen, and an automatic conversion screen, along with 4
types of screen size each. Gives support to 4 types of screen size covering D1, VGA, CIF, and
QCIF, among which users can select and monitor the most reasonable size.
Please, adjust the
mode in accordance with your PC specifications and monitoring purposes.