0150-0319A 59
Vista
Triplex
2
CDR/DVD
HTTP Port :
Select the HTTP Port. Select from Port 0 to 65535. Shortcuts are available for port 80
(Camera 1 button) and 8080 (camera 2 button). Consult with a qualified Network Administrator or an MIS
professional to configure these settings.
Listen Port:
The port the CT II uses to listen to communicate with WaveReader. When changing the port
number to another value, the WaveReader configuration file bwval.dat must also reflect the new value.
In order to use Dynamic DNS with GnuDIP, the user has to configure following in the menus:
•
Name Service
must be set to GnuDIP (Ethernet Setting Menu).
•
Primary Name Server
must be set to the IP address of the GnuDIP server (Ethernet
Setting Menu).
•
Hostname
must be set to the required hostname format e.g.
norbain04.companyname.net
. For registration purposes, the string preceding the first
dot is used as hostname (here: norbain04), the remainder is used as domain (here:
companyname.net). The hostname is set via the Ethernet Setting menu and is case
sensitive.
•
DDNS update interval
must be set to a reasonable value (e.g. 2 minutes).
•
The password for the DDNS server has to be set in the
Passwords->DDNS password
menu
. The password is 3 digits long (The Enter button can be used for the number 0).
When everything is configured correctly, the Vista Triplex
2
CDR/DVD will periodically send a
Dynamic DNS update message over TCP port 3495 to the Dynamic DNS server telling the
server its hostname. The Vista Triplex
2
CDR/DVD does not include its IP address in the
message. Instead the Dynamic DNS server extracts the IP address of the Vista Triplex
2
CDR/DVD via the Ethernet source IP address. This guarantees that the correct IP address is
used even when the Vista Triplex
2
CDR/DVD is behind a NAT router.
Main Menu
→
Communications
→
Ethernet Advanced
Use this menu to configure the Ethernet Advanced communications settings. Select from the following:
Bandwidth:
Local bandwidth control, set from 5Kb per second through 250Kb and Unlimited. The
minimum of this setting and the setting requested by WaveReader will be used.
TCP MTU Size:
Select from Standard, 1400, and 1200. The MTU describes the maximum possible TCP
packet size. Standard (1500) is optimal for most Ethernet network environments.
NOTE
Содержание Triplex2
Страница 88: ...0150 0319A...
