Vista SmartDisc 02 VLS-02DR Series, Руководство по установке

Страница: 56 / 68

8 Technical Data SmartDisc 02
Vista SmartDisc 02 55
8 Technical Data SmartDisc 02
Function Description
Video
Video standard CCIR/PAL and EIA/NTSC
Video compression (M)JPEG differential image compression, compression factor adjustable
per camera
Image formats Transmission: 720x288, 512x256, 256x128, 128x80 pixel and 16 bit
colour mode; Recording: 720x288, 512x256 pixel and 16 bit colour mode
Video inputs 2 x BNC, 1 V
pp
/75 Ohm with loop in outputs (automatic termination)
Video outputs Camera switcher with manual, alarm and sequencer control; 1 x FBAS
(BNC), 1 V
pp
/75 Ohm
Motion detection Camera selective with definable detection areas for alarm transmissions
and event triggered recording (HDD)
Signal monitoring Video signal monitoring (sync signal and image content ) for all cameras
with alarm trigger
Audio (optional)
General Optional plugin module for bidirectional audio transmission
Audio compression True Speech Codec, 16 bit, 80 - 4,000 Hz
Audio inputs 1 x Line in (0-2 V
pp
, nominal 0,775 V
pp
)
Audio outputs 1 x Line out (0-2 V
pp
, nominal 0,775 V
pp
) and 1 speaker output (1 Watt/
8 Ohm)
Transmission, recording
General Video and audio transmission, simultaneous recording and replay of video;
online evaluation with local and/or remote receiver stations
MultiCast, Multi-Unicast Simultaneously up to 6 IP connections, or 5 IP and 1 dialup connection, or
4 IP and 2 dialup connections
Web Server Up to four simultaneous IP connections via PC, Smartphone or PDA
browser (in addition to five standard connections))
Video transmission of
live and archive images
With up to 50 fps via IP (LAN internet, DSL) and dial-up connections (PSTN/
POTS, ISDN, GSM, HSCSD/ UMTS)
Recording speed Up to 50 fps depending on compression mode, image content and bit rate
Recording media Integrated 2.5" hard disk (E)IDE drive (120 GB) with adaptive multi-track
management (2 tracks)
Trigger recording/
transmission
Contact trigger, integrated motion detection, external serial commands
and timer (weekly calendar)
Recording modes Event triggered up to 50,000 events per camera with pre-alarm and post-
alarm or continuous recording, all modes with integrated timer (weekly
calendar)
Recording parameters
(value "0" = maximum
speed)
Event-triggered recording: Interval = 0-999 sec and duration = 1-999 sec
separately adjustable for pre-alarm and post-alarm; continuous recording:
Interval = 0-999 sec timer controlled (also event optimized)
Callback Automatic callback to pre-programmed receiver station with
SmartControl software