Vista SmartDisc 02 VLS-02DR Series, Руководство по установке

Страница: 20 / 68

3 System description
Vista SmartDisc 02 19
Pin assignment
terminal block
10 Aux in1 Control
input
Tamper input for dialup with automatic switching of video
input 1 (V1 in) to a SmartControl receiver unit.
Note: The operation of this input is independent of the status
of the arm/disarm enable input "Al a/d"
11 Speaker + Audio If your SmartDisc 02 is equipped with an Audio Card , use this
output for connecting a loudspeaker with 1 W / 8 Ohm for
audio reproduction at the object of observation. The output is
protected against overload, but not against shorts. Using a
speaker with matching maximum output is recommended.
12 Speaker - Audio
13 12V DC + Power,
+
Supply voltage is 12V DC. Only connect the device to your local
power supply system using the provided power supply unit
with the prepared connection cable. Only use the power supply
cable matching your grid (Euro/UK).
14 12V DC Power,
ground
15 R1 [Common] Relay Device configuration allows you to allocate the following
functions to any relay:
■
Manual remote control with SmartControl, SmartControl
PRO or SmartControl CLIENT distinguishing between
switch and pushbutton functions
■ Switching to at least one SmartControl receiver unit with
active online connection
■ Error relay
16 R1 [normally open] Relay
17 R1 [normally closed] Relay
18 R2 [Common] Relay
19 R2 [normally open] Relay
20 R2 [normally closed] Relay
21 Aux in2 Control
input
Auxiliary input 2: Reserved
22 Ground Common ground for all inputs of type "control input"
23 Ctrl in1 Control
input
Camera control inputs for external contact triggered recording
and/or selective dialup to a SmartControl receiver unit for
video inputs 1 and 2. These control inputs can be used for
event recording as well as for event optimised continuous
recording.
24 Ctrl in2 Control
input
Pin
Labeling/
description
Type Function
⊥
⊥
12 1
24 13