Vispera Infinite Vision 24SOLO1, Руководство пользователя

Страница: 34 / 43

BASIC FEATURES
32
USING THE USB FEATURES
1. Always switch the TV off before attaching a USB
storage device to your TV.
2. Connect the USB storage device to one of the USB
ports on your TV.
3. Press the button on the remote control or TV to
turn the TV on.
4. Press the Menu button on your remote control. Use
The file system only supports FAT32 format.
If you want to keep recorded DTV programmes the
transfer rate of the storage device must not be less than
5MB/s, otherwise the picture and sound of the
programme will be affected and a warning statement
will be shown on the TVs screen. If this happens please
upgrade your USB storage device.
the buttons to select USB MEDIA from menu
then press the OK button to open.
PICTURE SOUND CHANNEL LOCK
TIME NETWORK SETTINGS
USB MEDIA
IMPORTANT:Some portable USB hard disks may require
more power than the TVs USB port can supply. To ensure
the correct operation of the USB hard disk please use an
appropriate power adapter with the hard disk.
If you are using a USB Hub, please ensure its mains
adapter is connected to the mains supply as the
total current consumption may exceed 500mA, the
maximum the TV can supply.
Your TV screen will go temporarily blank when you
start recording as it takes a few seconds to stabilize the
connection to the USB storage device.
Always disconnect the USB storage device if it is not
going to be used for extended periods.