UltraReceiver User Manual
Specification
Issue No: 3
Page: 10
Ref: ULRX-ASUM-700X
Copyright © 2018 Vislink plc
75Ω BNC type chassis connector:
NOTE: If only two inputs are licensed, inputs three & four are not operational.
NOTE: When operating in Dual Pedestal LMS-T RF three & four are used for connection to
the two down convertors (this is different to the L2174 configuration).
UHF input 70MHz to 860MHz.
Receiver performance meets or exceeds ES 202 239 in DVB-T mode (typical
sensitivity -93dBm @DVB-T QPSK 1/2)
For configuration, please refer to the HOME > DEMODULATOR Menu.
NOTE: These inputs can have +20VDC output (set in Unit/LNB Power) to power the external
down converter; limited to 400mA per connector, short circuit protected.
75Ω BNC chassis mounted socket. Complies with ISO/IEC 13818-2 – 188-byte mode.
ASI input to the Decoder.
75Ω BNC chassis mounted socket.
Optional lock decoder output for both SD & HD video:
SD Mode:
Composite Black and Burst input for timing reference.
HD Mode:
Supports HD tri-level sync reference input.
Delay increased by 0 – 40ms.
75Ω mini BNC chassis mounted socket.
Output #1 - #4. Two independent outputs for
4 x 3G HDSDI:
ITU-R BT.656 / ANSI/ SMPTE 259M @ 270Mb/s. for UHD / 4K quadrant o/ps
HDSDI:
SMPTE 292M @1.485Gbps
For supported video formats, see Section 3.3.
75Ω BNC chassis mounted socket. Complies with ISO/IEC 13818-2 – 188-byte mode.
ASI output from the Demodulator or ASI input for decoding by an external decoder or
chaining to another UltraReceiver.