Template Operators Manual
General Information
Issue No: 1
Page: 7
Ref: INHG-ASUM-70XX
Copyright © 2020 IMT and Vislink are Vislink Technologies Inc. companies
1.
General Information
1.1.
General Safety Information
To ensure awareness of potential hazards, all personnel concerned with
the operation or maintenance of the equipment must study the
information that follows, together with local site regulations.
WARNING: RF Power Hazard: High levels of RF power are present in the
unit. Exposure to RF or microwave power can cause burns and
may be harmful to health. Switch off supplies before removing
covers or disconnecting any RF cables, and before inspecting
damaged cables or antennas.
WARNING: Avoid standing in front of high gain antennas (such as a dish)
and never look into the open end of a waveguide or cable where
RF power may be present.
CAUTION: We strongly recommended that you return any equipment
requiring RF servicing to Vislink.
WARNING- GaAs / BeO Hazard: Certain components inside the equipment
contain Gallium Arsenide and Beryllium Oxide that are toxic
substances. Whilst safe to handle under normal circumstances,
individual components must not be cut, broken apart,
incinerated or chemically processed. In the case of Beryllium
Oxide, a white ceramic material, the principal hazard is from the
dust or fumes, which are carcinogenic if ingested, inhaled or
entering damaged skin.
Please consult your local authority before disposing of these components.
CAUTION: Tantalum Capacitors: When subjected to reverse or excess
forward voltage, ripple current or temperature these
components may rupture and could potentially cause personal
injury.
CAUTION: This system contains MOS devices. Electro-Static Discharge
(ESD) precautions should be employed to prevent accidental
damage.
1.2.
Disposal Instructions
WARNING: DO NOT incinerate batteries. Exposing batteries to naked
flames or extreme heat sources can cause them to rupture or
explode.
DO NOT dispose of any of the supplied equipment as household waste.
The supplied equipment is not biodegradable in landfill sites. For safe
disposal of the supplied equipment, take it to your local (council/authority)
environmental waste site. For details, contact your local
authority/recycling center.
NOTE: In Europe dispose of all equipment in accordance with the
European Environmental directive.
