VISIOR GAMES ViSiTOUCH, Руководство по установке

Страница: 9 / 12

CHECK 1
Pre-power up checkups
Mounted onto a wall designed for the game.
All buttons are connected to separate aggregator boxes.
There are two cables connected from aggregator boxes to the computer and connectors tighten.
Make sure the ethernet cable with internet access is connected to the computer.
Make sure the display is connected with HDMI and USB cables.
All fixings are tight and secure.
No signs of damage, component failure and/or missing parts.
No trapped and/or pinched cables.
No loose cables that could become a tripping hazard.
Make sure there is no strain on the cables and the connectors.
All electrical components are away from contact with water and heat sources.
CHECK 2
Power up
All buttons light up for a brief moment.
The display is turning on.
Game start screen appears on the display after around 1 minute.
Go! sound is heard at startup.
All buttons are dim before the start of the game.
CHECK 3
Press start on display
The clock starts the countdown on the display.
The buttons light at the right side when starting the game.
All buttons flash when hit.
Sounds can be heard when the buttons are hit.
The hits are registered on the display.
Sounds are heard after the correct hit.
CHECK 4
Ready for use
Play area is clear.
Installation checklist
www.visiorgames.com
9