VISIOR GAMES ViSiTOUCH, Руководство по установке

Страница: 6 / 12

STEP 02b
First time setup
A typical installation should take 2 people around 45 minutes.
Insure there is nobody on the trampoline when
installing the device.
Provide 230V 5A for the device.
Provide internet connection point. All of the Visior-
games products need to connect to the internet.
If you own more than one device, provide internet
access to the device in the center of the park and
connect the devices via router or hub provided by us.
Make sure that the buttons are correctly
oriented and clear of any obstructions.
The buttons are pre assigned to only one
computer that came with the game set, you
can’t switch them with other systems. And they
are also assigned to the correct side.
The labels on the buttons define a number that is
correlated to the correct computer’s serial code.
Make sure the electrical power is off during
installation.
STEP 01
Install Left buttons (A) to the one
side of the cube and Stop buttons
(B) to the other of the cube.
STEP 02a
Install the monitor (F) onto the
construction.
5xB
∅ 6mm
5xA
F
Installation directly on the wall:
drill 4 holes (6mm) for the monitor
screw points and use the supplied
screws (L) and spacers (M).
M
L
VISI TOUCH – INSTALLATION MANUAL
6