22
Audio Mode
You can select the type of sound which best corresponds to your listening requirements by selecting Sound in SOUND
menu. Press ENTER button to select one of the audio mode such as User/Voice/Concert/Jazz. Also,you may select the it directlyby pressing
the SMODE button on the remote control. Only you select User, the Bass /Treble are operable.
Audio Language
Press
Ż
/
Ź
to select one of the audio language such as English/ French and Spain, but the condition is that the program system has
included the language code,or else,this item isn’t available, and you can’t select it.
Bass
Press
Ÿ
/
ź
button and then use
Ż
/
Ź
to increase or decrease the level of the lower-pitched sounds.
Treble
Press
Ÿ
/
ź
button and then use
Ż
/
Ź
to increase or decrease the level of the higher-pitched sounds.
Balance
Press
Ÿ
/
ź
button and then use
Ż
/
Ź
to adjust the audio output between left and right speakers.
Digital Audio Output
Press ENTER to select the one of mode of the digital audio output such as PCM and RAW.This function is available,
when the channel that you are viewing is DTV or the input source is HDMI.
Setup menu options
Press MENU on the front panel or on the remote control, then use
Ÿ
/
ź
and
Ź
/ENTER to select Setup the menu.
Tuning Band
Press ENTER key to select Air, Cable, Cable HRC, Cable IRC or Cable Auto. Besides, you may change it directly by pressing the
AIR/CABLE button on the remote control. When you select Air, the range of channel is 2-69.And when you select
Cable,the range of channel is 1-135.
DTV-Signal
In DTV mode, you can refer the strength of the current channel ,and you can tune manually and adjust the angle, orientation of the antenna
etc.
Auto Ch Search
Press
Ÿ
/
ź
key to move the cursor to the item to be selected (item selected is highlighted in yellow). Press ENTER key
to enter your selection and scan. After the scan is finished, the following menu will display. The channels found are automatically saved as
below:
1.Press
Ź
/
ENTER
to enter the Setup menu
2. Press
Ÿ
/
ź
button to move the cursor to the item to be
selected.
3 .Use
Ź
/
ENTER
button to select what you want to adjust
in the
Setup
menu
4. Press
Ż
/
Ź
button to adjust.
5. When you are satisfied with your adjustment, press
MENU
or
EXIT
to exit the main menu.
Содержание PVQ42VGB
Страница 15: ...15 Cable sample...
