background image

 

Chapter 1. Product Description

 

 

1.1 Overview 

VS-AXESS-4DLX is a powerful and stable access controller, using the logical architecture design. 

VS-AXESS-4DLX is designed with TCP/IP  network interface and its signal processed with special 
encryption and can be run offline. Anti-tampering function is also supported. 
 

1.2 Product Function 

 

The access controller is equipped with 32-bit high-speed processor; 

 

Supports  TCP/IP  network  communication,  with  self-adaptive  network  interface.  The 
communication data is specially encrypted to relieve the concern of privacy leak; 

 

Support recognition and storage of card number with maximum length of 20; 

 

The access controller can store 100 thousand legal cards and 300 thousand card swiping 
records; 

 

Supports multi-door interlock function, anti-passback function, multi-card function, first card 
open function, super card and super password function, online upgrade function and remote 
control of the doors; 

 

Supports tamper-proof alarm for card reader, alarm for door not secured, force opening door 
alarm, alarm for door opening timeout, duress card and code alarm, blacklist alarm and alarm 
for illegal card swiping attempts reaching the limit.; 

 

The alarm input of controller supports short circuit protection function and cut-proof function; 

 

Supports RS485 interface and Wiegand interface for accessing card reader. RS485 interface 
adopts  dual-interface  design  and  supports  loop  breakpoint  detection  and  redundancy 
function; Wiegand interface supports W26, W34 and is seamlessly compatible with third-party 
card reader with Wiegand interface; 

 

Supports various card types as normal/ disabled/ blacklist/ patrol/ guest/ duress/super card, 
etc.; 

 

Various indicators to show different status; 

 

Supports time synchronization via NTP, manual or automatic method; 

 

Supports  record  storage  function  when  it  is  offline  and  insufficient  storage  space  storage 
alarm function; 

 

The  access  controller  has  backup  battery  design,  watchdog  design  and  tamper-proof 
function; 

 

Data can be permanently saved after the access controller is powered off. 

 

Supports I/O linkage, and event linkage; 

 

Supports Ehome protocol, and inter-network communication. 

 

500 groups of password under the authentication mode of card and password; 

 

 
 
 
 
 
 
 

Содержание VS-AXESS-2DLX



























Отзывы: