VisionDrive Black Box VD-9000FHD, Руководство пользователя

Страница: 19 / 32

Users are recommended to use the SD card issued from the manufacturer.
The SD cards contain programs necessary to operate the product.
Also, the provided SD card is tested and certified by the manufacturer while other SD cards
may not match the performance and specifications.
To eject the SD card from the product, the engine has to be turned off and the key should
be removed from the ignition. A few seconds after the key has been removed, the product
will turn off automatically and the LED lamps will be turned off as well. The built-in back up
battery allows the last images to be stored into proper folders before the product is
completely turned off.
Wait until the LED lamps are turned off, then remove the SD card.
When the SD card is removed, it needs to be reinserted before you drive your car again.
Without the SD card, the product will not function properly.
Use only SDHC supporting SD card readers to read the SD(HC) card.
If a voice notification repeatedly announces to insert a correct SD card, it means the SD
card is defective or damaged. Purchase a replacement.
Purchase a replacement of the SD card when the voice notification keeps alerting even though
the SD card is inserted normally.
SD card readers can be purchased at computer accessory stores.
Regular software upgrading on SD card helps to prevent or discover bad sector and malfunc-
tions. Execute defrag or error checking for a stable and effective usage of the SD card.
Files recorded by the product are only allowed to have in the SD card. It may cause errors on
program.
-
-
-
-
-
-
-
-
-
Product Use
SD Card Use
18
visiondrive.co.kr