[0] No Exit Delay Arming & Quick Exit
+ 0
During the exit delay period, enter + 0 to arm the system immediately. This will cancel the
remainder of the exit delay.
While your system is armed, press + 0 to bypass the entire system for two minutes. You
may enter or exit freely until the system automatically returns to its prior armed status at the
end of the two minute period. Press to abort this timer and return the system to its
armed state.
User Programming
System Users with appropriate authority can set User PINs, system time,
auto-armimg time, and other advanced features. Only User PINs with
authority levels 01 and 02 can access this area.
Carefully follow the appropriate programming sequence listed below.
If necessary, press once to return (escape) to the ‘Home’ Mode for User
Programming, or twice to return to the system-wide ‘Home’ Mode.
Entering User Programmming + 8 + PIN
#
Clear
11:33am 08/17/05
Quick Exit
While the system is disarmed, press
+ 8 + PIN to enter User Program-
ming. When the system is in User programming’s ‘Home’ Mode, the display
will scroll through the six User Programming fields:
[1] User PIN
[2] Temporary PIN
[3] Utility PIN
[4] Set System Clock
[5] AM/PM or 24 Hr. Clock
[6] Auto Arm
Press 1 + to enter User PIN Programming. The display requests User Number of the
PIN you wish to program [01, 02...08]. Enter the two digit User Number and press . Now
enter the 4 digits you wish to use for the PIN number, press , set the two digit authorization
level and press . Either continue entering codes and authorization levels, or press # two
times to exit User PIN programming.
(see below for more information regarding User PIN Authorization Levels)
[1] User PINs 1 +
8