Vision allows system users to control many advanced features. This provides quick ser-
vice, greater convenience, and lower operating cost. Access these features by pressing
and the feature number.
[1]
Chime
[2]
Smoke Detector Reset
[3]
System Walk Test
[4]
Viewing Alarm Memory
[5]
Viewing System Trouble
[6]
Bypassing Zones
[7]
Installer Programming
[8]
User Programming
[9]
No Entry Delay Arming/Utility Output
[0]
No Exit Delay Arming/Quick Exit
[1] Chime + 1
I
f your system is equipped, specified detectors can ring a chime tone from the keypads while
the system is disarmed. This chime can be turned on or off by pressing + 1 while the
system is disarmed. Two short beeps indicate that the Chime has been turned on, one long
beep indicates that the Chime has been turned off. Arming your system automatically turns
off the chime. Ask your security company if you would like the chime to turn on automatically
everytime you turn off your security system.
If your system has smoke detectors, press + 2 to reset the smoke detectors after an alarm
[2] Smoke Detector Reset
+ 2
User Functions
Test your system monthly to ensure proper operation Follow this recommended procedure:
· Call your monitoring company to let them know you are testing your system.
· Confirm that all zones are ready (Green ready light is On).
· Press + 3 to initiate ‘Walk Test Mode’. The display will show “Walk Test” on the top
line and automatically scroll through the name of each zone on the bottom line (except for
FIRE zones and 24Hr. zones (these zones must be tested by the security company).
· Activate each detector to confirm proper operation. As each zone is activated, its name
will be deleted from the scrolling list on the bottom line of the display (check each detector
seperately if there is more than one detector on a zone). When all zones have been
activated, the display will briefly show “None Found” and return to normal operation.
· If operating the detector does not cause the indicator light to go out, test the detector
again. Contact your alarm company if a detector or zone does not operate properly.
[3] System Walk Test
+ 3
11:33am 08/17/05
Chime
5