Vision Spirit G XL Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 51

Vision Spirit G XL Скачать руководство пользователя страница 7

SPIRIT G XL 1-3KVA PF.09 - UPS www.visionups.com

7

3

Installation

This section explains:



Equipment inspection



Unpacking the cabinet



Checking the accessory kit



Cabinet installation



Wiring installation



Initial startup

Inspecting the Equipment

If any equipment received has been damaged during shipment, keep the shipping cartons and
packing materials for the carrier or place of purchase and file a claim for shipping damage. If
you discover damage after acceptance, file a claim for concealed damage.
To file a claim for shipping damage or concealed damage: 1) File with the carrier within 15
days of receipt of the equipment; 2) Send a copy of the damage claim within 15 days to your
service representative.

NOTE

Check the battery recharge date on the shipping carton label. If the date has expired and the batteries

were never recharged, do not use the UPS. Contact your service representative.

Unpacking the Cabinet

CAUTION



Unpacking the cabinet in a low-temperature environment may cause

condensation to occur in and on the cabinet. Do not install the cabinet until the
inside and outside of the cabinet are absolutely dry (hazard of electric shock).



The cabinet is heavy (see page 44). Be careful to unpack and move the cabinet.

Carefully to move and open the carton. Keep the components packaged until
ready to install.
To unpack the cabinet and accessories:

1.

Open the outer carton and remove the accessories packaged with the cabinet.

2.

Carefully lift the cabinet out of the outer carton.

3.

Discard or recycle the packaging in a responsible manner, or store it for future

use.
Place the cabinet in a protected area that has adequate airflow and is free of
humidity, flammable gas, and corrosion.

Checking the accessories

It includes：



UPS user's guide



Software Suite CD



USB cable



Power cord (Input and output)



RS232 cable

«
...
5
6
7
8
9
...
»

Содержание Spirit G XL




















































Отзывы:

Нет отзывов