6.7” ADV LIGHT CANNON
WARNING: Bolts, Nuts, and Washers are Stainless Steel. DO NOT
USE Pneumatic or Electric Tools to Tighten and Loosen. The Hard-
ware Will Permanently Lock Together.
LIGHT ANGLE ADJUSTMENTS
1.
Use the 5mm Allen Key (A1) to loosen the side bolts Part (B2) on each
side of the light.
2.
Adjust the light to your desired angle and tighten Bolts (B2).
(B1)
(Mounting Bracket)
(W1)
(N1)
MOUNTING KEY
Part (B1) Bolt
Part
(Mounting Bracket)
Part (W1) Washer
Part (N1) Nut
MOUNTING DIAGRAM
ADJUSTMENT KEY
Part (B2) Bolt
a. 5mm Allen Head Bolt
(B2)
3.69”/93.7mm
MOUNTING INSTALLATION INSTRUCTION
1.
Determine where the light/lights will be placed.
2.
Place mounting bracket with light to desired location. Using a marker or
pick tool, mark the center point of the bolt hole on the mounting sur-
face.
3.
Set the light aside. Drill out a large enough hole to fit the [M10] bolt
Part (B1).
4.
Line up the mounting bracket with the hole you just drilled, slide the
[M10] Bolt (B1) through both.
5.
On the other side of mounting surface slide the [M10] Washer Part
(W1) and [M10] Nylock Nut Part (N1) onto the [M10] Bolt (B1). Tighten
Nut & Bolt to desired tightness.
LIGHT ANGLE ADJUSTMENT DIAGRAM:
