Connect your
MAIN HARNESS
to your
CIGARETTE LIGHTER ADAPTER
as shown below if you
plan to receive power through your Cigarette lighter port.
Hardwire Option: - Connect BLACK wire of
MAIN HARNESS
to ground. Connect RED
wire of
MAIN HARNESS
to 12VDC power
supply. The green wire is only used if you
want the C2 input to automatically display
when the vehicle is put into reverse. If this
is your preference please attach this wire
to the appropriate connection on your
vehicle.
Ref. Fig.2
BLACK and RED Wire of
MAIN HARNESS
Place camera in desired blind spot near a power supply. First connect your power lead to your
camera.
Please place protective tape over this connection to ensure no water damage.
Connect BLACK wire of
Power Lead
to ground. Connect RED wire of
Power Lead
to 12VDC
power supply. To verify that the system is receiving power, cup your hands over the camera lens,
and the LED lights will have a red glow
.
