\
Assembly Instructions
Installation Instructions:
Camera can be mounted using magnet and attaching hardware. These are the steps required to attach the
magnet to the camera.
1. Position and align center hole of camera and bracket assembly on top of magnet.
2. Install bolt from underside of magnet and secure with flat washer and nut. Tighten this connection.
Tip: Although magnet contains 65lb pull force, it we recommend mounting your camera on a flat surface, and a zip
tie be used in addition to fasten the camera as a preventative measure in the event the camera is knocked off.
1. Slotted holes of the universal base mount can be used to position and permanently attach the monitor
base to structure.
2. Installer must ensure that attaching hardware is suitable to support the weight of monitor and base.
3. Once the base has been fastened into position the monitor can be installed. Adjust monitor to desired
position and tighten the screws on the side of the monitor
4. Optional suction cup mounts are also available through your local dealer.
Connect
MONITOR
harness to the
MAIN HARNESS
. Ensure arrows are aligned on outer jacket of
cable ends. (IF YOU BEND THE PINS IT VOIDS THE WARRANTY). Ref. Picture Below.
