Predator-HD Installation Manual V2.1.21.03
Page 9
© 360 Vision Technology Ltd.
4 Connections
Predator Composite Cable
This pre-made Predator Composite Cable is available in 3m, 10m, 25m and 40m lengths. It contains video
coax, power and data cables. One end is fitted with the IP68 12-way connector for direct connection to the
Predator, the other is supplied with all cables stripped and tinned ready to be connected to the two-part
connectors which are supplied with the Predator-HD power supply.
Connecting the composite cable to the Predator-HD
Route the cable through the brackets and cable glands before connecting it to the Predator-HD. Ensure that the
pins and sockets are lined up correctly, insert the connector and tighten the locking ring to make the connector
water tight.
It is important that the water should not be allowed to pool around the connector, as this will increase the risk of
contamination and corrosion which may cause poor connections.
The connector on the base of the Predator-HD is rated IP68, when it is correctly connected and the locking ring
is tight.
Predator-HD 12-way connector pin-out.
Cables for Ethernet Connection to Predator-HD IP Power Supply
Use CAT5, CAT5e or CAT6 cable for Ethernet Connections to Predator-HD power supply (PRED-PSU-UNI).
When using PRED-25M or PRED-40M the distance can be increased to 100m if a Network Switch is fitted local
to the Predator-HD Power Supply.
Socket 12-pin socket (solder side view)
fitted by 360 Vision to the composite cable
Coax Screen (B)
Grey (C)
White (D)
Blue (E)
Violet (F)
Pink (G)
Green (H)
Orange (J)
Red (K)
Black (M)
Brown (L)
Coax Core (A)
A
B
L
C
D
E
F
G
M
H
K
J
Maximum Distance from Network Switch/Router to PRED-PSU-UNI
Using
PRED-40m
Using
PRED-25m
Using
PRED-10m
Using
PRED-3m
3m
50m
100m
100m