Vision Research Phantom v1211, Руководство пользователя

Страница: 29 / 88

Chapter 3: Phantom Software
23
Set Time: Synchronizes the time stamps embedded
in the recorded image data to the computer’s clock or
supplied IRIG-B clock.
Bit Depth:
The Phantom v1211, v1611, v2011, and
v2511 camera operate in 12-bit mode only.
Partitions:
Select the number of desired partitions
(evenly divided memory segments) from the ‘Partitions’
pull-down menu. For basic camera setups, this should be
set to one.
Lens Control:
Will be available for Canon EF lenses only,
for control of aperture and focus.
Backup & Restore:
Allows for user settings to be saved
and recalled from the camera’s memory.
Resolution:
Set the the number of pixels used to capture
an image. For example, if 1280 x 800 (width x height) is
set, the full sensor space is available. Smaller resolutions
allow higher recording speeds. Cropped resolutions are
set using the ‘Crop and Resample’ menu in Image Tools.
Sample Rate:
Set the acquisition frame rate in frames-
per-second (FPS).
Exposure Time (shutter):
Set the exposure time in
microseconds, percentage, or degrees (this depends on
how the PCC preferences are set).
EDR (Extreme Dynamic Range):
Set a unique expo-
sure time (defined in microseconds or a percentage of
the defined ‘Exposure Time’) to pixels that may become
saturated, (over exposed).
Exposure index:
This is a reference display of the EI
value in relation to the Image settings.
CSR (Current Session Reference):
Closes the
camera’s internal shutter and resets the black point of
every pixel for optimal image quality.
Image Range and Trigger Position:
The slider
represents the memory buffer, with the ‘Duration’ indicat-
ed in seconds and the total number of frames available.
Camera Settings
& Cine Settings
Camera Settings are used
to set and recall the overall
camera system parameters.
Cine Settings are used to set
the capture parameters.