vision microsystems EPI 800 Скачать руководство пользователя страница 2

Страница: 2 / 91

WARRANTY AGREEMENT

Vision Microsystems Inc. warrants to the original purchaser that the articles furnished are

free from defects in material and workmanship and will perform to the applicable

published specifications for one year from date of installation and subsequent operation.

The installation and use of this equipment constitutes an agreement between the original

purchaser and/or user to the following terms and conditions of this warranty:

1. The liability of Vision Microsystems Incorporated shall be limited to replacing or

repairing, at its option, any defective components which are returned, freight prepaid, to

Vision Microsystems Incorporated or an authorized repair center.

2. In no event shall Vision Microsystems Incorporated be held liable for damages to

property or personnel due to the use of this product.

3. Equipment or parts which have been subjected to misuse, abuse, accident, alteration,

neglect, unauthorized repair or installation are not covered by this warranty. Vision

Microsystems Incorporated shall have the right of final determination as to the existence

and causes of defect.

4. When items are replaced or repaired, the warranty shall continue in effect for the

remainder of the warranty period or for 90 days, whichever is longer.

5. This warranty is in lieu of any other warranty expressed or implied.

6. The purchaser/operator shall lawfully sign and date this agreement stating the date of

system installation and return it to Vision Microsystems Incorporated for registration.

7. Internal battery life is not included in warranty.

DATA PROCESSING UNIT SERIAL NUMBER:

FIRST FLIGHT DATE: month: day: year:

NAME (printed)

I have read this agreement and agree to the terms and conditions.
SIGNATURE :

VISION MICROSYSTEMS INCORPORATED

4255 Mitchell Way

BELLINGHAM, WASHINGTON 98226

PH:(360) 714-8203 FX:(360) 714-8253

Содержание EPI 800




























































































Результаты поиска

Содержание EPI 800

Отзывы:

vision microsystems EPI 800, Уведомление о установке, Страница: 2 / 91

Результаты поиска

Содержание EPI 800

Отзывы: