13
[ Manual updating ]
1.
The firmware update file needs to be copied into the Memory
The Memory must be
formatted
first through the specific PC viewer or through the main body of the black box before
copying the update file (
main_d15_1.23.4567-20150226.ko.bin)
.
2.
Required to insert the Memory into the main body of the black box after powering off the black box.
3.
Required to supply power to the black box.
4.
Required to wait for about 10
–
20 seconds.
5.
As the updating starts, the LEDs will blink and short beeping sound will be generated.
6.
When the updating process ends, the LEDs will be turned off and, at the same time, a short beep buzzer sound will
be generated. After a short while, the black box will get started again.
Caution: When the system gets restarted after the format is performed (according to the formatting menu embedded in
the main body) the previous setting conditions will be maintained.
7. Firmware Upgrade (3)
