VP-600
5A
5. Main Function
To select any function, press
MENU
button until the required one is shown
on the display. Select the function by
ENTER
button and the display will blink.
Use
DOWN
and
UP
button to change the mode. Once the required mode
has been selected, press
ENTER
button to setup. Back to the functions
without any change press
MENU
button.
Press
MENU
button for 3 seconds to exit the functions, press “Chase Group
1”, “Chase Group 2” or “Chase Group 3” button to run the chase built-in or
you have programmed. Enter chase group, the LED on, then press the
chase group button again to choose the chase. Once the chase has been
selected, press “Manual” button into manual mode, the LED on, you can
choose the chase step by step; press “Fade” button into fade mode, the LED
on, the unit will run all steps of the chase automatically, at this time, you can
press
UP/DOWN
button to adjust the fade time; press the “Auto” button into
auto mode, the LED on, the unit will also run all steps automatically, and you
can press
UP/DOWN
button to adjust the wait time; press the “Blackout”
button, the LED on and the unit into blackout mode.
VP-600
14A
40 Channels:
30 Channels:
