VP-600
11A
6.2 Rear View
1. DMX IN
DMX Input RJ45 or 3 pin XLR socket
2. DMX OUT
DMX Output RJ45 or 3 pin XLR socket
3. FUSE T6.3A
For protecting the unit when the transient current is too big.
4. POWER
Power cable for AC input.
5. LED
DC power & signal output for linking LED fixtures.
7. DMX Controller
Using universal DMX controller to control the units, you have to set DMX
address from 1 to 512 channel so that the units can receive DMX signal.
Press the
MENU
button up to when the
Address
is showing on the display.
Pressing
ENTER
button and the display will blink. Use
DOWN
and
UP
button to change the DMX512 address. Once the address has been
selected, press and keep
ENTER
button pressed up to when the display
VP-600
8A
Edit Chase
(only chase number 6~8 are editable)
Press the
MENU
button up to when the
Edit Chase
is showing on the
display. Press
ENTER
button and
1
will blink, use
UP/DOWN
button to
choose group 1, 2 or 3, press ENTER button to setup and use
UP/DOWN
to
set
Num
-number (06-08),
Leng
-length (01-42, the steps, you choose from
the total amount of steps, you want to run, for example, if the total amount of
steps you set is 42, you can choose only first 1-10 steps to run) and
Value
(to set
step
,
P
-A (output all) or 1-10,
C
-Color,
W
-White,
D
-Dimmer), press
ENTER
button to setup. Back to the main functions without any change
please press the
MENU
button.
Manual Test
Press the
MENU
button up to when the
Manual Test
is showing on the
display. Press
ENTER
button and
1
will blink, use
UP/DOWN
button to
choose
P
-A (output all) or 1-10, press
ENTER
button to store, use
DOWN/UP
to set
D
-Dimmer,
S
-Strobe,
R
-Red,
G
-Green,
B
-Blue,
W
-White,
press
ENTER
button to setup. Back to the main functions without any
change please press the
MENU
button.
White Balance
Press the
MENU
button up to when the
White Balance
is showing on the
display. Press
ENTER
button and
1
will blink, use
UP/DOWN
button to
choose
P
-A (output all) or 1-10, press
ENTER
button to store, use
DOWN/UP
to set
R
-Red,
G
-Green,
B
-Blue, press
ENTER
button to setup.
Back to the main functions without any change please press the
MENU
button.
Auto Test
Press the
MENU
button up to when the
Auto Test
is showing on the display.
Press
ENTER
button
Testing
will blink on the display and the unit will run
self-test by built-in program. To go back to the main functions please press the
MENU
button.
