VISIO BW-903 RGBW, Руководство пользователя

Страница: 10 / 20

9B
Program Shows
Press the MENU button up to when the is shown on the display. Press the ENTER
button and select the mode, Press the ENTER button and the display will blink. Use
the DOWN and UP button to select the (Show 17) ,
（
Show 18
）
or
（
Show 19
）
. Once the show has been selected, press the ENTER button to enter program setting.
Use the DOWN and UP button to select (length, the steps, you choose from the total
amount of steps, you want to run, for example, if the total amount of steps you set is 50, you can
choose only first 1-10 steps to run). (step), select to set (color) and
(white) and (dimmer) for every step. Automatically return to the main functions without
any change after one minute. To go back to the previous functions without any change press the
MENU button.
Manual Mode
Press the MENU button up to when the is shown on the display. Press the ENTER button
and the display will blink. Use the DOWN and UP button to select the
（
Red
）
,
（
Green
）
,
（
Blue
）
,
（
White
）
,
（
Dimmer
）
or
（
Strobe
）
.
Once selected, press the ENTER button to setup, then use the DOWN and UP button to adjust the
value (0~255) or automatically exit menu mode without any change after one minute. To go back to
the functions without any change press the MENU button.
White Balance
Press the MENU button up to when the is showing on the display. Pressing the
ENTER button and the display will blink. Use the DOWN and UP button to select the
（
Red
） ， （
Green
） ，
or
（
Blue
）
mode. Once the mode has been selected, press the
ENTER button to setup or automatically return to the main functions without any change after one
minute. To go back to the previous functions without any change press the MENU button.