VISIO BW-903 RGBW, Руководство пользователя

Страница: 3 / 20

2B
1. Safety Instruction
WARNING
y
Please keep this User Guide for future consultation. If you sell the unit to another user, be sure
that they also receive this instruction booklet.
Caution:
y
All fixtures are intact from the manufacturer, please operate follow up the user manual, artificial
fault are not under guarantee repair.
y
Unpack and check carefully there is no transportation damage before using the unit.
y
DO install and operate by operator.
y
Use safety chain when fixes the unit.
y
The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent
surfaces.
y
Before operating, ensure that the voltage and frequency of power supply match the power
requirements of the unit.
y
It’s important to ground the yellow/green conductor to earth in order to avoid electric shock.
y
Maximum ambient temperature Ta: 40
℃
. Don’t operate it where the temperature is higher than
this.
y
DO NOT connect the device to any dimmer pack.
y
Make sure there are no flammable materials close to the unit while operating, as it is fire
hazard.
y
Look over power wires carefully, replace immediately if there is any damage.
y
Unit surface temperature may reach up to 60
℃
. DO NOT touch the housing bare-hand during
its operation.
y
Avoid any inflammable liquids, water or metal objects entering the unit. Once it happen, cut off
Please read the instructions carefully which includes important
information about the installation, operation and maintenance.