MB-2 User Manual
19
13. Special Note on Car Compatibility
In order to use MB-2 you must ensure you car is equipped with UHI/MHI (US version of UHI)
connector. This connector is usually located in the tray under the front armrest. W204 type of
vehicles also comes with UHI/MHI but the system works in a different logic therefore, require
special attention. You can find out further information in the later chapter “Special Note on
W204 Vehicle” of this manual.
If your Mercedes Benz has pre-installed Nokia system with fixed cradle you are very likely to
require ViseeO MBU-1000 for Bluetooth upgrade. Please contact your ViseeO dealer for further
information or write to us at
if you are not sure what system you have in
your car.
14. Special Note on W204 Vehicle (C-Class 2007+)
14.1 Software Switch
Mercedes Benz W204 vehicles (C-Class cars produced in 2007 and later) which comes with a
different type of UHI/MHI system that requires different type of software to work with.
Therefore, before inserting MB-2 into the W204’s UHI system you will need to switch to the
right software so MB-2 will work without any problem. To switch to the right software:
1.
Remove the rubber from the software switch at the back of MB-2.
