MB-2 User Manual
13
7. Pairing Multiple Phones
You are only required to pair your phone with MB-2 once. It stores the link with your phone to
allow automatic reconnection in the future.
If you want to pair with another phone with MB-2 please repeat the pairing procedure and
phonebook sync process as described in Chapter 4, 5 and 6 respectively.
The ViseeO MB-2 can store pairing information for up to three mobile phones at a time and if
you attempt to pair a fourth phone, then this new pairing will push out the oldest of the three
existing pairings.
The more recently connected phone will have the higher priority in connection and MB-2 will
always try to connect to the higher prioritized phone first unless MB-2 can not find it and
therefore, it will move on to connect with the next phone in the priority list.
For instance, if you have two phones in the car at the same time, Phone A and Phone B and both
are paired with MB-2. Phone A is last connected with MB-2 on the 1
st
of Jan 2009 and Phone B is
last connected with MB-2 on the 8
th
of Jan 2009. Therefore, MB-2 will try to connect to Phone B
first unless Phone B’s Bluetooth is turned off.
Note:
The ViseeO MB-2 stores the contacts for each paired phone separately. This means once Phone A is
connected with MB-2 user will only be able view Phone A’s phonebook and will not be allowed to access
Phone B or Phone C’s contacts. However, this works differently on the W204 vehicle as all contacts are stored
