Viscount SYNTH-8, Руководство пользователя

Страница: 6 / 44

EN
- 4
Synth-8
– User Manual
Front panel
FRONT PANEL
[ON/OFF] button.
Button to switch on/off the sound generated by the module. When the button Led is on,
the module is active and able to receive notes from the keyboard.
[VOLUME] knob.
Adjust the volume of the sound generated by the module.
Status Leds.
These Led lights show the status of several sound generation parameters. When the
Led light is on:
[ ]: the Split function is active (see Common Section , Split Mode parameter, in the
Legend ‘70s
User Manual) and the sound is assigned to the Lower part of the
keyboard. You can activate the Split function and assign the sound to the lower
section by pushing [SPLIT] and the module [ON/OFF] button simultaneously. Once
the sound has been assigned, press [SPLIT] and [ON/OFF] (on the module) again, to
assign the sound to the Upper section.
[ ]: the sound is currently transposed (see E.Piano Section , Note Shift parameter,
in the
Legend ‘70s
User Manual).
[ ]: the module output signal is assigned to the effect FX1 (see E.Piano Section ,
Output Routing parameter, in the
Legend ‘70s
User Manual). To assign an effect,
select the FX1 effect (to do so, press the [FX 1] button under the EFFECTS section)
then, while pressing [FX ON], push the [ON/OFF] button on the module. Once the
effect has been assigned, press [FX ON] and [ON/OFF] again to undo.
[ ]: the module output signal is assigned to the effect FX2 (see E.Piano Section ,
Output Routing parameter, in the
Legend ‘70s
User Manual). To assign an effect,
select the FX2 effect (to do so, press the [FX 2] button under the EFFECTS section)
then, while pressing [FX ON], push the [ON/OFF] button on the module. Once the
effect has been assigned, press [FX ON] and [ON/OFF] again to undo.
[ ]: activation of the arpeggiator / step sequencer. The LED flashes synchronized
with the metronomic tempo set for the arpeggio or the playback of the sequences
(see
Arp Section on page. 16 ).
1
2
3
1
2
3
4
7
6 5