Viscount SYNTH-8, Руководство пользователя

Страница: 11 / 44

EN - 9 Synth-8
– User Manual
Parameter editing
OSC 1 and OSC 2 sections
The Synth-8 has two oscillators per voice, each capable of
generating different waveforms. The SYNTH OSC1 and
SYNTH OSC2 menus contain the adjustment parameters
of the first and second oscillator respectively. These
parameters are common for both oscillators and are
described in the table below.
To access these menus, in the
EDIT SYNTH-8 screen
(page 6 ) place the cursor on the OSC 1 or OSC 2 fields
and press the dial data entry.
Parameter name Description
Osc1 Shape
Osc2 Shape
[ASSIGN 1]
Selection of the oscillator waveform.
Values:

Sawtooth: sawtooth wave.

Alt Saw 1, Alt Saw 2 : variants of the sawtooth waveform,
based on phase shift with two different effect settings.

Fat Saw 1, Fat Saw 2: double sawtooth wave, with two
different detuning levels.

Triangle: triangular wave.

Alt Triangle 1, Alt Triangle 2: variants of the triangular
waveform, based on the shift of the phase with two different
effect settings.

Fat Triangle 1, Fat Triangle 2: double triangular wave, with
two different levels of detuning.

Pulse: pulse wave, with duty cycle at 50%.

Pulse 60, Pulse 80, Pulse 95: pulse wave, with duty cycle at
60%, 80%, 95%.

Fat Pulse 1, Fat Pulse 2: double pulse wave, with two different
detuning levels.
Osc1 Coarse
Osc2 Coarse
[ASSIGN 2]
Tuning of the oscillator in semitones.
Values: -24 to +24 semitones
Osc1 Fine
Osc2 Fine
[ASSIGN 3]
Fine tuning of the oscillator in cents of a semitone.
Values: from -50 to +50 cents of a semitone
Osc1 Level
Osc2 Level
[ASSIGN 4]
Signal level generated by the oscillator.
Values: between 0 and 127
NB
The table below shows all the parameters available for the OSC 1 and OSC 2 sections. The knob
or button that allows direct control from the panel is shown under the name of the parameter.