EN
- 12
Synth-8
– User Manual
Parameter editing
AMP ENV section
With this section it is possible to adjust the temporal
evolution of the sound amplitude. The amplitude envelope
applicable to the
Synth-8
is the classic ADSR, which is
made up of four phases over time: Attack, Decay, Sustain,
Release.
To access this menu, in the
EDIT SYNTH-8
screen (page
), place the cursor on the
AMP
ENV
field and press the data entry dial.
Parameter name
Description
Amp Attack
[ASSIGN 1]
Time taken for the signal to reach its maximum level after a key is pressed.
Values
: between 0 and 127
Amp Decay
[ASSIGN 2]
Time required to reach the Sustain level after the maximum level has been
reached.
Values
: between 0 and 127
Amp Sustain
[ASSIGN 3]
Sustain level, that is the level of the signal reached after the Decay phase.
Values
: between 0 and 127
Amp Release
[ASSIGN 4]
Time required for the signal level to reach zero after the key is released.
Values
: between 0 and 127
Amp VelAmt
Modulation amount of the amplitude envelope controlled by the key velocity. At
high parameter values, the signal level is increased as you play harder.
Values
: between 0 and 127
NB
The table below shows all the parameters available for the AMP ENV section. The knob or button
that allows direct control from the panel is shown under the name of the parameter.
Attack
Time
Level
Time
Decay
Time
Release
Time
Sustain
Level
key down
key up
Содержание SYNTH-8
Страница 1: ...Edition 1 1 User Manual EN Manuale Utente IT SYNTH 8 V I R T U A L A N A L O G ...
Страница 2: ......
Страница 22: ......
Страница 43: ......