52
User Guide
Viscount
Sonus 60
/
60
Dlx
-
45
/
45
Dlx
-
40
/
40
Dlx
9. INSTRUMENT GENERAL SETTINGS
(SET-UP menu)
The SET-UP menu contains all the instrument’s general settings except for the settings relating to the MIDI
interface and the accessory and utility functions. To recall this menu, select the SET-UP field from the main
video page:
The functions available are as follows:
o
1st TREMULANT:
setting of the first tremulant speed and depth for each individual manual.
o
2nd TREMULANT:
setting of the second tremulant speed and depth for each individual manual.
o
REVERBERATION:
selection of the type of room for the reverb effect.
o
INT.
AMPL. EQUALIZER
(Internal amplification equalizer)
:
setting of the 5-band equalizer of the
internal amplifier.
o
INT.
AMPL. PANNING
(Internal amplification panning)
:
setting of the stereophonic distribution of
the stops of the internal amplification system, to simulate different types of wind- chests for the various
stops.
o
INT.
AMPL. TUNE-UP
(Internal amplification tune-up)
:
sets the stereophonic distribution of signal
on the side speakers.
o
PROG. FUNCTIONS
(Programmable functions)
:
settings relating to operation of the combinations,
the pistons, the Crescendo and the trimmers underneath the manuals.
o
ENC. CONFIGURATION
(Enclosed configuration)
:
program the [ENC] piston function
.
o
EXT. OUT EQUALIZER
(External outputs equalizer)
:
setting of the equalizers of the PROG. OUT
outputs on the rear.
o
EXT. SUB EQUALIZER
(External sub equalizer)
:
equalizer adjustment for the external output on the
back [GEN. SUB.].
o
EXT.
OUT ROUTER
(External outputs router)
:
setting of the routing of the stops on the PROG.
OUT outputs on the rear to simulate the position of the wind-chests and the arrangement of the pipes
inside them.
o
EXT. OUT VOLUME
(External outputs volume)
:
setting of the volumes of the PROG. OUT outputs
on the rear.
o
EXT. OUT CONFIG
(External outputs config)
:
setting of the PROG. OUT rear outputs.
o
EXT. OUT RESIZE
(External out resize)
:
Adapts automatically the link between stops and rear outputs,
according to the amount of outputs actually used.
