Viscount chorum 20 Скачать руководство пользователя страница 44

Страница: 44 / 62

Viscount

Chorum

User Manual

Now the sequencer is ready to overdub:

The screen carries information about the functions of the buttons:

[ENTER]:

start recording.

[EXIT]:

leave the sequencer.

[VALUE -]:

decrease play /recording speed. It can be seen on top left as percentage (100% in the

picture above).

[VALUE +]:

increase play / recording speed. It can be seen on top left as percentage (100% in the

picture above).

As the recording begins, the controls change again:

[ENTER]:

pause / start recording.

[EXIT]:

stop recording.

[VALUE -], [VALUE +] maintain the functions described above.

Press [EXIT] to quit the recording. The system will ask you to accept the overdubbing:

You can choose one of the following options:

ACCEPT:

accept the overdubbing. In case the overdub track is shorter than the original songs, it will

not be shortened.

TRIM AND ACCEPT:

accept the overdubbing. If the overdub track is shorther than the original

song, this will be trimmed to end together with the overdubbing.

PLAY:

play the song with the overdubbing, so as to assess the track. The changes will not be saved

yet.

PLAY FROM OVD

(overdub)

plays the song, starting from the first event of last overdubbing, so as

to assess the track. The changes will not be saved yet.

DISCARD:

discards the overdubbing.

Содержание chorum 20































































Результаты поиска

Содержание chorum 20

Отзывы:

Viscount chorum 20, Руководство пользователя, Страница: 44 / 62

Результаты поиска

Содержание chorum 20

Отзывы: