Viscount chorum 20 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 62

background image

10

Viscount

Chorum

User Manual

10.

Manual II pistons.

-

[1] / [6]: Man. II divisional combinations. These combinations can be modified. To do so, follow
the procedure described at point 13.

-

[HR]: restores the voice setup prepared in manual mode before a Man.II memory was recalled,
when the piston itself is on.

-

[P]: Man. II to Pedal coupling.

-

[III]: (only available for 3-manual models): Man.III to Man.II coupling.

-

[I] (only available for 3-manual models): Man.I to Man.II coupling.

11.

Manual I pistons.

-

[1] / [6]: Man.I divisional combinations. These combinations can be modified. To do so, follow
the procedure described at point 13.

-

[HR]: restores the voice setup prepared in manual mode before a memory for Man.I was recalled.

-

[P]: Man.I to Pedal coupling.

-

[III] (only available for 3-manual models): Man.III to Man.I coupling.

-

[II] (only available for 2-manual models): Man.II to Man.I coupling.

12.

[T] or [TUTTI] piston.

Piston or toe piston (where available) that recalls Tutti. The Tutti can be modified, for further
information read point 13.

13.

[S] piston.

To save a combination or the Tutti, after setting up the voices, press and hold the [S] piston; then
press the piston corresponding to the combination you wish to save.
To save a Crescendo step, select it through the Crescendo pedal, press and hold [S], and then press the
general memories [HR] piston. To copy the content of one step to another, first select the step you
wish to copy, then press and hold the [S] piston, select the step in which you wish to paste the content,
and finally press the general memories [HR].

Organ Styles, tremulant Speed and Depth and orchestra voices can be saved to any divisional and
general combination or Tutti. This allows a wider range of different combinations, adjusting the sound
to play different songs.. To use these functions, first you have to set the saving options through the
COMBINATIONS function, described in par. 5.6.

14.

Style pistons.

Here are the style pistons for the selection of the organ style (see also chapt. 6).

-

[BAR]: baroque

-

[BRK]: barock

-

[ROM]: romantic

-

[SYM]: symphonic

After the selection, if the display shows the main video page (see chap. 3), a pop-up message appears
for a few seconds, showing the Style name.

N.B.

If the [S] piston LED light is off, this means that the SECURITY function for the combinations
(see par. 5.8) is active. In this case it is not possible to modify combinations, Tutti and the
Crescendo.

«
...
10
11
12
13
14
...
»

Содержание chorum 20































































Отзывы:

Нет отзывов

Похожие инструкции для chorum 20

Masoneilan 12400 Series

Бренд: Baker Hughes Страницы: 81

Бренд: Van Walt Страницы: 2

Бренд: RayTek Страницы: 72

Бренд: Magnetrol Страницы: 40

Бренд: ICS Страницы: 2

Бренд: CAISSON Страницы: 5

Бренд: Tactical Controls Страницы: 11

Бренд: FarmChem Страницы: 8

Бренд: Ebtron Страницы: 5

Бренд: Okolab Страницы: 4

Бренд: Idexx Страницы: 6

Бренд: IDEAL INDUSTRIES Страницы: 10

Бренд: M-system Страницы: 5

Бренд: VEE GEE Страницы: 2

Disklavier Mark III Series

Бренд: Yamaha Страницы: 39

Бренд: Kawai Страницы: 64

Бренд: Kawai Страницы: 28

Бренд: Kawai Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды