14
Viscount
Chorum
User Manual
To set the value of a parameter, select it with the cursor, then press use [VALUE +] and [VALUE -].
Some parameters have a central range value (e.g. -6 / 0 / +6); to modify the central value, press
simultaneously the VALUE buttons. This will select the central value.
The display field
MAIN MENU
allows to access the main menu with all the organ configurations. To
enter the menu, place the cursor on this field and press [ENTER].
To return to the main video page from the MAIN MENU, press [EXIT].
In the lowest part of the video page there are 2, 3 or 4 boxes (according to the model in use) that indicate:
o
BANK:
the current memory bank, selected through the pistons [S] and [PREV] or [NEXT];
o
CRESC.:
the currently selected
Crescendo step;
o
MANUAL II o MAN II:
Manual II expression level;
o
MAN III:
Manual III expression level;
o
MAN I:
Manual I expression level;
o
MAN I/PED:
Manual I and Pedalboard expression level.
o
M II/P:
Manual II and Pedalboard expression level.
3.1 THE MAIN MENU
The Main Menu contains several lower-level menus with all the settings of the instrument, divided into
groups.
Select the
MAIN MENU
field from the main video page. This page will appear:
As in the main video page the cursor is represented by the field with inverted colours. To move it, press
the buttons [FIELD
S
] and [FIELD
T
].
Here and in all the following video pages, some fields are used to access different pages. Select one of
these fields and press the [ENTER] button to access the corresponding page; when these fields are
selected, the name of the button appears on the right side of the field. Instead, when a field represents a
NOTES
-
When the instrument is switched on, its transposition value is set to zero.
-
Transposition does not have any effect on playback of songs with the internal sequencer
(unlike recording, where the notes are acquired with the current transposition). A specific
transposer is provided for this purpose (see chapt. 8).
-
If after the power on the system displays the error message “
RELESE CHECKSUM
ERROR
”, contact the technical support at
reporting the error type as it
appears on the second line (
SYSTEM
or
MODEL
) and the numbers in the “
M:
”, “
V:
”, “
S:
”
and
“
Release
” fields. You will receive the files and information necessary to restore the
instrument.
-
At power up, if you see the message "
PERIPHERALS UPDATE REQUESTED
", press
[ENTER] to perform the required operations to complete the update. If the message was
displayed again contact the technical support at
, specifying the
information displayed.
