ViscoTec PreeFlow plug'n'dose TP, Инструкция по эксплуатации и техническому обслуживанию

Страница: 6 / 12

plug’n’dose TP
operating and maintenance instructions
6 / 11 Version 1.3 Copyright ©
4.5 Organisational measures
The necessary personal protective equipment must be
provided by the operating organisation. All safety devices
that are fitted must be checked regularly. Safety glasses
and overalls must be worn during operation and cleaning
to provide protection against any splashes of chemicals.
All of the safety information contained in the respective
operating and maintenance instructions for the dispenser(s) that are connected to the
control unit must be complied with.
4.6 Preparing to operate - visual inspection
The control unit must be visually examined each day before the start of work and before
all shift changes. If there is any doubt as to the system's readiness for operation, it must
be shut down immediately and inspected by a specialist before operation resumes.
4.7 Preventing damage to the dispenser motor
The dispenser lead (connector 3, Chapter 5.1, Displays and controls /
connections on page 7) may only be connected and disconnected when the
power supply is isolated . The electronics in the drive motor could be damaged
if this precaution is not taken.