background image

 

5.4 Setting Address & Operation Mode 

Setting the controller address and operation mode, in AXS-100 / 
AXS-100XT version 2.06 and above, is performed by using the 
controller keypad (not by using DIP switches) - see figure 7. 

 
 

Enter controller No. (e.g. 1)

ENTER PASSWORD

                        XXXX

The display will be:

SETUP

EDIT KEYS

CONTROLLER

1

Enter

Enter

Enter

Enter

Select operation mode (e.g. 7)

MODE

    7

Note: Mode list is attached

 to the AXS-100 door.

Enter

Enter

Esc

Esc

4 times

EDIT REGISTERS

LOCAL SETUP

 

Figure 7 - Controller Address and Operation Mode Setting

 

6. MAINTENANCE  

 

6.1 Replacement Parts List 

1. Lithium battery 3V, cat. No. 0-9913-0. 
2. CRD-1, cat. No. 0-9923-2, or 0-9923-8. 
3. Proximity reader RDR-4, cat. No. 3-6304-0  

 

6.2 Periodic Check 

Once a month, the system must be checked by presenting a 
tag/card to the reader and verifying that the proper door is opened. 

6.3 Lithium Battery Handling/Disposal

 

Caution: Battery may explode if mistreated, do not recharge, 
disassemble or dispose in fire. 

Replace battery with PANASONIC Coin battery type CR2032, 3V 
only. Use of another battery may present a risk of fire or explosion. 
Dispose any used Lithium battery only in an approved disposal 
container. 
 

 

This device complies with the essential requirements and provisions of Directive 1999/5/EC of the European Parliament and of the Council of 9 
March 1999 on radio and telecommunications terminal equipment. 

WARNING!

 Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's 

authority to operate the equipment. 

    

  

WARRANTY

 

Visonic Technologies Ltd. and/or its subsidiaries and its affiliates ("the Manufacturer") 
warrants its products hereinafter referred to as "the Product" or "Products" to be in 
conformance with its own plans and specifications and to be free of defects in materials 
and workmanship under normal use and service for a period of twelve months from the 
date of shipment by the Manufacturer.  The Manufacturer's obligations shall be limited 
within the warranty period, at its option, to repair or replace the product or any part 
thereof. The Manufacturer shall not be responsible for dismantling and/or reinstallation 
charges. To exercise the warranty the product must be returned to the Manufacturer 
freight prepaid and insured. 

This warranty does not apply in the following cases:

 improper installation, misuse, 

failure to follow installation and operating instructions, alteration, abuse, accident or 
tampering, and repair by anyone other than the Manufacturer. 
This warranty is exclusive and expressly in lieu of all other warranties, obligations or 
liabilities, whether written, oral, express or implied, including any warranty of 
merchantability or fitness for a particular purpose, or otherwise.  In no case shall the 
Manufacturer be liable to anyone for any consequential or incidental damages for breach 
of this warranty or any other warranties whatsoever, as aforesaid. 
This warranty shall not be modified, varied or extended, and the Manufacturer does not 
authorize any person to act on its behalf in the modification, variation or extension of this 
warranty. This warranty shall apply to the Product only.  All products, accessories or 
attachments of others used in conjunction with the Product, including batteries, shall be 
covered solely by their own warranty, if any.  The Manufacturer shall not be liable for any 
damage or loss whatsoever, whether directly, indirectly, incidentally, consequentially or 
otherwise, caused by the malfunction of the Product due to products, accessories, or 
attachments of others, including batteries, used in conjunction with the Products. 

The Manufacturer does not represent that its Product may not be compromised and/or 
circumvented, or that the Product will prevent any death, personal and/or bodily injury 
and/or damage to property resulting from burglary, robbery, fire or otherwise, or that the 
Product will in all cases provide adequate warning or protection. User understands that a 
properly installed and maintained alarm may only reduce the risk of events such as 
burglary, robbery, and fire without warning, but it is not insurance or a guarantee that 
such will not occur or that there will be no death, personal damage and/or damage to 
property as a result. 

The Manufacturer shall have no liability for any death, personal and/or bodily injury 
and/or damage to property or other loss whether direct, indirect, incidental, 
consequential or otherwise, based on a claim that the Product failed to function. 

 

However, if the Manufacturer is held liable, whether directly or indirectly, for any loss or 
damage arising under this limited warranty or otherwise, regardless of cause or origin, the 
Manufacturer's maximum liability shall not in any case exceed the purchase price of the 
Product, which shall be fixed as liquidated damages and not as a penalty, and shall be 
the complete and exclusive remedy against the Manufacturer. 

Warning:

 The user should follow the installation and operation instructions and among 

other things test the Product and the whole system at least once a week.  For various 
reasons, including, but not limited to, changes in environmental conditions, electric or 
electronic disruptions and tampering, the Product may not perform as expected.  The user 
is advised to take all necessary precautions for his /her safety and the protection of 
his/her property. 
6/91 

   

   

  

 
 
 
 
 

 
 
 
 
 

 

VT World Headquarters

 * Tel Aviv, Israel * Tel: + 972 3 768-1400 * [email protected] 

 

VT Americas

 *

 Bloomfield, CT (USA) * Tel: 1-800-223-0020 * [email protected]

 

 

VT United Kingdom

 * Beckenham Kent BR3 90BF, U.K. * Tel: + 44-870-730-0840 * vtuk_support@ visonictech.com 

 

Visonic GmbH

 * D-40215 Düsseldorf, Germany * Tel: + 49-0-211-600-696-0 * support@ visonictech.de

 

 

 

 

Additional information may be found at: 

www.visonictech.com

 

 

 

 

 

 

Page 4 of 5

 

DE6280-9  Oct. 09 

 

W.E.E.E. Product Recycling Declaration

 

For  information regarding the recycling  of this product  you must contact the  company from which you orignially purchased it. 
If you are discarding this product and not returning it for repair then you must ensure that it is returned as identified by your 
supplier. This product is not to be thrown away with everyday waste. 
Directive 2002/96/EC Waste Electrical and Electronic Equipment.

 

 

 

Отзывы: