VIRTUFIT HTR 3.0i, Руководство пользователя, Страница: 6 / 35

EN
VirtuFit HTR 3.0i Hometrainer
6
STEP 1
Notes
：
Max load 150kgs
No independent braking system
Assembly Steps:
1. Take front and rear feet support 2&3 from the package and use 45, 46,
47, 36, screws, spring washers, flat washers, nuts to connect with main
frame 1.
2. Take pedals 4, 5, and distinguish the left and right part (the mark L is
the left, the mark R is the right), and pedals are mounted on the crank
according to the direction of rotation shown in the figure, and locked
and fixed.
Note: According to the label tip of the regulating tube, the maximum
height is to STOP
• Take front and rear feet support 2&3 from the package and use 45, 46, 47, 36, screws, spring washers,
flat washers, nuts to connect with main frame 1.
Missing parts: If you think you are missing certain parts in your package, carefully check the styrofoa and
the device. Some parts (bolts, screws, etc.) are already attached to/in the device.
Error message: Ensure that all cables are carefully attached. The aluminum legs are very sensitive and
must remain straight. Do you receive an error message after mounting your device? Then you have to
straighten these aluminum legs again, this may cause the error message to disappear.
Socket screws: The device contains socket screws, make sure that the allen key is firmly in the
bolt before you apply force to the key. In this way you prevent the head of the socket head screw from
being rotated.
NOTE!
The transport wheels must be mounted on the front of the appliance.
ASSEMBLY INSTRUCTIONS