VirtuFit Elite Indoor Cycle Pro Spinbike
19
EN
1. When POWER ON or hold RESET key for 2s, buzzer will sound 1s and LCD full display for 2 seconds
(Figure1). Then display wheel diameter and unit for 1s (Figure2). Then go to Standby mode (Figure3).
And the motor has been settled, it must be reversed to zero, then go to LOAD=1 to wait for each setting.
2. Enter (Figure3) screen to select the sport mode, selection order MANUAL -> BEGINNER -> ADVANCE ->
SPORTY -> CARDIO -> WATT etc sport modes (recyclable).
3. If choose MANUAL, press the MODE button to enter MANUAL function. If press START button, then it
starts counting sport directly, all the calculated values will be counted up (as Figure 4). Or you can press
UP and DOWN to adjust LOAD level; If press MODE to set TIME (Figure5), setting sequence is TIME ->
DIST -> CAL -> PULSE (as Figure 5~8) which can be set cyclically. After setting, press START button to start
motion state.
4. If select BEGINNER function (Figure 9), press MODE confirm to next step.Set BEGINNER1~4 (Figure10),
press UP/DOWN to select BEGINNER 1, and press MODE to confirm entering this mode, you can press
UP/DOWN button to adjust and set TIME or directly press START button to start workout. After START,
OPERATION
FIGURE 1
FIGURE 2
FIGURE 3
FIGURE 4
FIGURE 5
FIGURE 6
FIGURE 7
FIGURE 8
CONTROL PANEL
