VirtuFit Elite Indoor Cycle Pro Spinbike
18
EN
CONTROL PANEL
FUNCTION
FUNCTION
EXPLANATION
SCAN
TIME-DISTANCE-CALORIES-PULSE-RPM / SPEED change automatically every 6
seconds.
SPEED
The speed is displayed during training when you start training.
RPM
Revolutions per minute.
TIME
The total cycling time from the beginning to the end of the exercise is displayed.
If no signal is sent to the monitor for 4 seconds during training, the time stops.
DISTANCE
The distance of each workout is displayed when you start training. If a distance
target is set, it runs from the set distance to 0 and an alarm sounds.
CALORIES
The total calories from the beginning to the end of the exercise is displayed. If a
calorie goal is set, the calorie count decreases from the goal to 0 and an alarm
sounds.
PULSE
Current heart rate is displayed after 6 seconds, if it is detected.If no heart rate
signal is detected after 6 seconds, a “P” appears on the display. An alarm sounds if
your heart rate is higher than your target heart rate. Range: 0-30 ~ 230 BPM.
WATT /
LOAD
Shows the training wattage.
