© 2020 Virginia Diodes, Inc.
—All Rights Reserved—Rev: 3 April 2020
Low Frequency Broadband Frequency Triplers (WR-15 to WR-6.5)
These triplers will have a coaxial input port and a rectangular waveguide output port, with the exception of the WR-6.5 tripler, which has rectangular waveguide
input and output ports. The drawing and corresponding dimensions are for a typical WR-12 frequency tripler. Other triplers (WR-15 to WR-6.5) will have similar
configuration and dimensions.
Middle Frequency Broadband Frequency Triplers (WR-5.1 to WR-1.5)
These triplers will have rectangular waveguide input and output ports. The drawing and corresponding dimensions are for a typical WR-5.1 frequency tripler. Other
triplers (WR-5.1 to WR-1.5) will have similar configuration and dimensions.
High Frequency Broadband Frequency Triplers (WR-1.2 to WR-0.34)
These triplers will have a rectangular waveguide input. The output port will be either a rectangular waveguide or an integrated horn antenna (~25dBi). The drawing
and corresponding dimensions are for a typical WR-0.8 frequency tripler. Other triplers (WR-1.2 to WR-0.34) with the exception of WR-0.65 will have similar
configuration and dimensions. WR-0.65 frequency tripler will be in the compact form factor. See below.
Sec-2
Pg-4
Section
Two
Product Overview
E-Field
E-Field
E-Field
0.90
”
0.90
”
0.90
”
RF Input
0.75”
0.75”
0.80
”
RF Input
1.00
”
0.80
”
0.25
”
RF Output
RF Input
RF Output
RF Output
E-Field
E-Field
