15
1.877.4VPULSE
or
www.virginpulse.com
CD/DVD OPERATION
This owner’s manual explains the basic instructions of this unit. Some DVD discs are
produced in a manner that allows specific or limited operation during playback. As such,
the unit may not respond to all operating commands. This is not a defect in the unit.
Refer to the instruction notes of discs.
“
” may appear on the screen during operation. A “
” means that the desired operation
is not permitted by the unit or disc.
Playing a Disc
1. Press
STANDBY/ON
button (on unit or remote) to turn on the unit.
2. Press
FUNCTION
button to select DVD mode.
See CUSTOMIZE DVD PLAYER SETTINGS (page 31 to 35) before proceeding to
step 3.
3. Press
OPEN / CLOSE
button to open the disc door.
4. Hold the disc by its sides and carefully press onto the central support of compartment with
the printed side facing towards you until you hear a “click”.
5. Press
OPEN / CLOSE
button to close the disc door.
It takes a short while for your unit to load the disc. The unit will automatically start playback
of the CD/DVD(for most discs).
6. Press
PLAY
button.
Notes:
• Use
OPEN/CLOSE
button to open or close the disc door. Do not attempt to pull/push
the disc door by hand, or you may cause damage to the unit.
• Let the disc door open completely before removing the disc. Press
OPEN/CLOSE
button to close the disc door after you remove the disc.
Pause Playback (still mode)
Press
II
PAUSE
button to hold still of a playing disc. To resume normal playback press
PLAY
button.
Stop Playback
Press
STOP
button once at the position where you want to interrupt playback. To
resume playback at the position where the disc was stopped, press
PLAY
button
again.
If you press the
STOP
button twice, the unit’s memory will be cleared and pressing the
PLAY
button will reset the disc to the beginning.
Skip to a Different Track
• Press
PREV
button once to skip to the start of the previous track.
• Press
NEXT
button to skip to the next track.
• For audio CD disc, use the number buttons (remote control only) to jump straight to the
desired track number.