Viper Responder 350, Руководство по установке

Страница: 28 / 40

© 2008 Directed Electronics- All rights reserved.
28
Channel Number Function Wire Color
1 Arm/Disarm
2 Panic only
3 Silent Mode/Remote Valet/Trunk Release RED/WHITE
4 Remote Start or other accessories WHITE/BLUE
5 Arm only
6 Disarm only
7 Auto-learn standard configuration*
(four-button transmitter)
8 Auto-learn three-button configuration*
9 Delete all transmitters
*NOTE: For Auto Learn Configurations, see Transmitter Configurations section of this
guide.
4
. Press the transmitter button: While holding the Valet/
Program button, press the button from the transmitter that
you wish to assign to the selected channel. The unit will chirp
indicating successful programming. It is not possible to teach
a transmitter button to the system more than once.
Channels #2, 5, 6: Channels 2, 5, and 6 are used to assign the arm, disarm
and panic functions to separate buttons on the remote control. Teaching a
button to Channel 5 or Channel 1 erases some information about that remote
from memory, and auxiliary functions that are desired may have to be repro-
grammed.
Channel #9: If any button from a known transmitter is programmed to
Channel 9, all transmitters will be erased from memory and the system
features will revert to the default settings. This is useful in cases where the
one of the customer’s transmitters is lost or stolen. This will erase any lost or
stolen transmitters from the system’s memory. It can also be used to start from
scratch if the transmitter buttons were programmed incorrectly.