Viper Responder 350, Руководство по установке

Страница: 19 / 40

© 2008 Directed Electronics- All rights reserved.
19
4.
Select a Feature.
Press and release the Valet/Program
switch the number of times corresponding to the feature
you wish to change. For example, to access the third
feature, press and release the switch three times. Then
press the switch once more and HOLD it. The siren
will chirp the number of times equal to the step you
have accessed.
5.
Program the Feature.
While holding the Valet/
Program switch, you can toggle the feature on and off
using the remote transmitter. Pressing
�������
will select
the one chirp setting. Pressing
�������
will
select the two chirp setting.
(See Systems Features menus)
NOTE: The Valet pulse count feature (2-5) and the
Channel three timed output (2-9) have five possible
settings each. Pressing
�������
will toggle through all the
two-chirp settings.
6.
Release the Valet/Program Switch.
Once a feature is programmed: •
Other features can be programmed within the same menu. •
Another menu can be selected. •
The learn routine can be exited if programming is complete. •