Viper E 17HDP-EU, Руководство пользователя

Страница: 4 / 12

4 VE17P-EU VE17HDP-EU VE17DSP-EU VE17HSP-EU VF72309EU (1) – 2012-04-10
ENGLISH USER MANUAL
INTrODUCTION
notE
the numbers in brackets refer to the components shown in Machine description chapter.
MANUAL PUrPOSE AND CONTENTS
the purpose of this Manual is to provide the operator with all necessary information to use the machine properly, in a safe and au-
tonomous way. it contains information about technical data, safety, operation, storage, maintenance, spare parts and disposal. before
performing any procedure on the machine, the operators and qualified technicians must read this manual carefully. Contact Viper in
case of doubts concerning the interpretation of the instructions and for any further information.
TArgET
This manual is intended for operators and technicians qualified to perform the machine maintenance.
The operators must not perform procedures reserved for qualified technicians. Viper will not be answerable for damages coming from
the non-observance of this prohibition.
HOw TO kEEP THIS MANUAL
the User Manual must be kept near the machine, inside an adequate case, away from liquids and other substances that can cause
damage to it.
DECLArATION OF CONFOrMITy
The declaration of conformity, supplied with the machine, certifies the machine conformity with the law in force.
notE
two copies of the original declaration of conformity are provided together with the machine documentation.
the CE-declaration is printed in the Quick start guide.
IDENTIFICATION DATA
the machine model and serial number are marked on the plate.
This information is useful when requiring machine spare parts. Use the following table to write down the machine identification data.
MaCHinE model ...............................................................................
MaCHinE serial number ...................................................................
OTHEr rEFErENCE MANUALS
− service Manual (can be consulted at Viper service Centers)
− spare parts list (see www.vipercleaning.eu)
SPArE PArTS AND MAINTENANCE
All necessary operating, maintenance and repair procedures must be performed out by qualified personnel or by Viper Service
Centers. only original spare parts and accessories must be used. Contact Viper for service or to order spare parts and accessories,
specifying the machine model and serial number.
CHANgES AND IMPrOVEMENTS
Viper constantly improves its products and reserves the right to make changes and improvements at its discretion without being
obliged to apply such benefits to the machines that were previously sold.
any change and/or addition of accessories must be approved and performed by Viper.
PUrPOSE AND INTENDED USE
All single-disc cleaners are designed to clean and care for floor coverings inside buildings only.
This appliance is suitable for commercial use, for example in hotels, schools, hospitals, factories, shops, offices and rental businesses.
any other use is considered as improper use. the manufacturer accepts no liability for any damage resulting from such use. the risk for
such use is borne solely by the user.
Proper use also includes proper operation, servicing and repairs as specified by the manufacturer.